News
- Nippon Pulse Offers Parallel Cabling Option on LSM
-
September 2nd, 2010
Nippon Pulse introduces a new parallel option on its Linear Shaft Motor to simplify cable management and routing when using multiple motors with one encoder and one servo drive.
- PCD45x1 Series Controls Two-Phase Stepper Motors
-
August 5th, 2010
Nippon Pulse’s PCD45x1 series controller chips are programmable pulse generators that are equipped with an excitation sequence generator circuit that allows for the driving of two-phase steppers motors. The PCD45x1 series is a low-cost option and eases the user’s ability to configure a multi-axial motion control system. The PCD4541 controls four axes, the PCD4521 two axes, and the PCD4511 one axis.
- Nippon Pulse to Showcase in Booth 907 at AATExpo
-
August 2nd, 2010
Nippon Pulse America, a leader in the motion control industry, is bringing its products to the Midwest at the AATExpo at the Donald E. Stephens Convention Center in Rosemont, IL on September 28-30, 2010. Along with non-working demos, Nippon Pulse will be also showcasing several working demonstrations in booth #907.
- Nippon Pulse Introduces L250SS Linear Shaft
-
July 6th, 2010
Nippon Pulse has announced the release of its newest linear servomotor, the L250SS Linear Shaft Motor. The new SS-series is highlighted by a forcer that is 50mm in length, significantly reducing the length that had been offered on the standard L250 motor. The standard L250 forcer length ranges from 120-210mm.
- PF25G Stepper Motor, High Torque in Small Package
-
June 15th, 2010
In its well established line of tin-can stepper products, Nippon Pulse offers its PF25G gearhead stepper motor. The PF25G motor is an ideal fit for projects within the medical device industry that require a high torque motor but are limited in available space.
- Nippon Pulse Shows Products at ATX East
-
June 14th, 2010
For the third time during the 2010 calendar year, Nippon Pulse successfully exhibited its products at a top trade show, ATX East at the Jacob Javits Center in New York City.
- Motionnet© Serial Communication from Nippon Pulse
-
May 6th, 2010
A serial communication system from Nippon Pulse, the Motionnet©system allows users to greatly reduce wiring and provides input/output control, motor control, CPU emulation, and message communication. The network system transfers four bytes of data in 15.1 µsec using cyclical communication to control both input and output. Motionnet© system is suited for, but not limited to, factory automation, biomedical machines, and semiconductor equipment.
- Nippon Pulse Opens Newly Constructed R&D Center
-
February 25th, 2010
Nippon Pulse recently opened a multi-million dollar Research & Development facility in Tokyo, replacing the old center which had been in existence for many decades.
- Nippon Pulse Has Successful ATX South
-
February 16th, 2010
Nippon Pulse successfully exhibited its motion control technology at ATX South in late April.
- Nippon Pulse Successfully Exhibits at ATX West
-
January 6th, 2010
Nippon Pulse would like to thank all of those that stopped by our booth at ATX West in Anaheim, CA in early February.
- NPA Now Offering SLP Acculine Stage Solution
-
October 29th, 2009
Nippon Pulse America, Inc., (NPA), a leader in the motion control industry, is now offering its high precision SLP Acculine linear, single-axis stage series. The SLP stage has incorporated NPA’s successful linear shaft motor into an all-inclusive stage that offers solutions for industrial applications.
- 24-Hour Prototyping Available from Nippon Pulse
-
October 22nd, 2009
Available from Nippon Pulse America, Inc., (NPA), a leader in the motion control industry, is an in-house model shop that offers 24-hour prototyping capabilities. The NPA model shop can add connectors and pinions to motors and also has the ability to prototype tin-can steppers, linear stepper motors, hybrid motors, controllers, and drivers to meet your individual need.